120 Photos
Memphis, TN
5,024 hrs
CAT0140MTN9D01393
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12829897
In yard
No
Year
2019
Manufacturer
Model
Asset type
Serial number or VIN
CAT0140MTN9D01393
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, Joystick Steering, Rear View Camera, Pre-Wired for Grade Control, US EPA Label, Requires Diesel Exhaust Fluid, 14 ft / 4.27 m Moldboard, 14.00-24 Tires
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT0140MTN9D01393
Hour Meter / Odometer
5024 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Operator/Maintenance Manual
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Warning Lights
Operational, Maintenance/Service light stays on
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.
Transmission
Rear Drive Axle
Rear Tandems (Chain Drives)
Limited Function Check
The drivetrain was operational.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Articulation Cylinders
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Dripping leak on the left cylinder
Saddle Positioning Cylinder
Saddle Lock Pin
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.
Y-frame
Y-frame Pivot Trunnion
Shims remaining
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins
Front Axle Oscillating Pin
Steering Linkage
Wheel Tilt Linkage
Limited Function Check (grader)
The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Firestone
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Blade Condition
Blade Cutting Edge Condition
Oil Sample Analysis
engine | hydraulic | |
---|---|---|
date of analysis | Jan 21, 2025 | Jan 21, 2025 |
Silicon | 9.64 PPM | 8.22 PPM |
Tin | 2.92 PPM | 0.19 PPM |
Silver | 0.07 PPM | 0 PPM |
Aluminum | 4.79 PPM | 8.63 PPM |
Chromium | 2.21 PPM | 0.25 PPM |
Lead | 114.12 PPM | 2.17 PPM |
Copper | 22.67 PPM | 4.14 PPM |
Nickel | 1.51 PPM | 0.66 PPM |
Iron | 107.29 PPM | 9.2 PPM |
Glycol | NEG | N/A |
Water | NEG | N/A |
Fuel | <5% | <5% |
Items must be paid in full by Friday, June 27, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.