92 Photos
1995 Roadtec SB2500 Wheel Asphalt Transfer Machine
Located
Des Moines, IA
Des Moines, IA
Usage
141 hrs
141 hrs
Serial number
SB-2500281
SB-2500281
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15612969
In yard
No
Features
Cummins 6 Cylinder Diesel Engine, Hydrostatic Drive, 32 in Discharge Conveyor
General Appearance
Serial Number / VIN
SB-2500281
Hour Meter / Odometer
141 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Indication of Additional Hours
There is an hour meter replacement/change label that has the following reading on it: 4889
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Not operational
Control Station
Gauges
Operational
Mirrors
Hydraulic Controls
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Emissions Status
US EPA Label not legible
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Chassis
Steering Linkage
Steering Wheel Play
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Not operationally checked
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Limited Function Check
The main components were operational when checked without a load.
Tire Size
All of the tires are the same size, 21.00-25 Front tires, 21.00-25 Rear tires
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Tread Depth
LF 9 /32", LR 18 /32", RR 17 /32", RF 8 /32"
Wheel Condition
Wheel Studs
Raise / Lower Mechanism
Hydraulic raise
Support Frame
Feed Hopper
Length @ top: 9’6”, Width @ top: 3’8”
Belt Tensioner
Feed Conveyor Condition
58 in wide feed belt
Feed Conveyor Frame
Feed Conveyor Drive Motor
Operational
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Operational
Discharge Conveyor Head and Tail Pulley
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 12, 2026 |
| Silicon | 0.15 PPM |
| Tin | 1.46 PPM |
| Silver | 0 PPM |
| Aluminum | 0 PPM |
| Chromium | 2.02 PPM |
| Lead | 2.94 PPM |
| Copper | 1.25 PPM |
| Nickel | 0.39 PPM |
| Iron | 12.72 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.