



90 Photos
Located
Jebel Ali Free Zone, ARE
Jebel Ali Free Zone, ARE
Usage
7,690 hrs
7,690 hrs
Serial number
74065
74065
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14517340
In yard
Yes
Features
Cat 6 Cylinder Diesel Engine, 3500 mm x 4400 mm Vibratory Grizzly Feeder w/Hydraulic Fold Hopper Wings, Impact Crusher, 1340 mm x 800 mm Single Deck Screen, 980 mm Wide Under Crusher Conveyor, 500 mm Wide Right Discharge Conveyor, 980 mm Wide End Discharge Conveyor, Cable Remote Control, Auto Lube, 600 mm Triple Grouser Track Shoes








Serial Number / VIN
74065
CE Mark
CE Marked
Hour Meter / Odometer
7690 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.





Gauges
Operational
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.










Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
The engine started and ran.















Pumps (Hydraulics)
Hydraulic Motors
Dripping leak
Valves
Hydraulic Tank
Hoses
Crusher Door Cylinders
Conveyor Cylinders
Power Travel Drive System
Travels properly
Limited Function Check
The hydraulic system could not be operationally checked.






























Feed Hopper
Length @ top: 4400, Width @ top: 3500, Grizzly length: 3300, Width between grizzly bars: 800
Crusher Base Frame
Welded
Crusher Chamber Frame
Jaw, Blow Bar and Anvil Wear Surface
Crusher Drive System
Not functionally checked
VSI / HSI Crusher Chamber
Crusher Roll Condition
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Not operationally checked
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Screen Deck
Incline screen, Number of decks: 1
Deck Frames / Wear Bars






















Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
22 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
22 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Idler
Right Sprocket
Items must be paid in full by Tuesday, January 8, 2030. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.